Fenglu Aluminium
Use Fenglu’s published heat-sink and fabrication information to prepare precise questions about extrusion geometry and the finished part.
Source-described identity
- Name on company source
- Foshan Sanshui Fenglu Aluminum Co., LTD.
- Published product range
- The company profile describes aluminum alloy extrusions, including architectural and industrial profiles. These published categories do not confirm an order-specific alloy, geometry or approval.
- Source-reported contact location
- The contact page gives Fenglu Tower on Jihua Fifth Road in Foshan, Guangdong. Treat this as a published contact address; it does not identify the factory that will fulfill your order.
- Source links
- Company profile · Industrial profile category · Company contact page
Published range and purchase scope
Fenglu’s company profile describes architectural and industrial extrusions. Its heat-sink category offers standard and customized products. The fabrication page describes machining centers and cutting equipment, including drilling and tapping operations. Published equipment descriptions do not establish the achievable tolerance, available capacity or internal production route for your order.
| Product or route | Company-source information | Still to confirm |
|---|---|---|
| Thermal profiles | A dedicated heat-sink category is published. | Specify the installation envelope, heat load, airflow and contact interface. Ask for the proposed manufacturing route and validation responsibility; do not treat a product image as a thermal result. |
| Cutting and machining | The fabrication page describes cutting equipment and CNC operations. | Ask which cut, drilled and threaded features are offered for your section. Require feature-specific tolerances, inspection stages, deburring and finish requirements in the written response. |
| Architectural and industrial sections | Both extrusion families appear in the company overview. | Confirm the section, alloy, temper, supplied length and downstream operations. Distinguish a raw extrusion from a finished component and from an assembled building system. |
Company-specific quotation questions
- Keep tooling equipment separate from part capability
- The fabrication introduction discusses mold-making equipment before describing profile machining and cutting. Ask which facilities will make the die and which will process the delivered parts. Tooling descriptions alone do not prove finished-part capability.
- Identify the actual production route
- The published Fenglu Tower contact address is a commercial contact location, not proof of the factory fulfilling your order. Confirm the extrusion, finishing and machining sites and any external operations, with an accountable final inspection owner.
- Control the contact face and finish sequence
- For a heat sink, identify the mating face, flatness or surface requirements determined by the designer, masking and final finish. Ask when machining and measurement occur and how handling protects that face. No universal thermal or dimensional limit is supplied by this profile.
Compare the offer before releasing an order
Keep a separate line for extrusion, cutting, machining, surface treatment, packing and transport. Record included and excluded work, the drawing revision and who owns each inspection report. Request written clarification of minimum order, tooling charges, sample cost, delivery terms and schedule rather than inferring them from the corporate website.
Agree how trial samples will be identified and reviewed. Approval of one sample does not approve a later production lot: identify repeat-order revision controls, required lot evidence and the person authorized to release production. Resolve deviations before acceptance and keep commercial agreement separate from technical approval.
Prepare your company review
Official sources and contact routing
Sources reviewed 3 October 2026. Follow the company’s contact page to confirm the current appropriate sales channel. AlumHome has not contacted the supplier or confirmed a response commitment.
Record status and evidence limits
This is an editorial research record based on company-published pages, not a supplier-submitted listing or paid placement. No independent factory audit, certificate validation or commercial relationship is established. Current prices, order minimums, lead times, capacity and availability remain unconfirmed.
Source review: 3 October 2026. Confirm order-critical details directly; company pages can change. Prepare a correction with the exact field and updated source.