Forging & Heat Treatment
Specify a forging route and final material condition without confusing geometry with temper.
Start with the delivered scope
Forging shapes metal under compression. Heat treatment changes material condition; it is a separate process decision tied to the specified alloy and product.
AlumHome buyer checklist · Updated 2 October 2026. Use this to prepare questions; confirm the actual engineering and acceptance requirements with the responsible parties.
Build the requirement
- Finished requirement
- Give the finished drawing and distinguish the forging envelope from surfaces that will be machined later. State the alloy and required final temper.
- Process proposal
- Ask whether the proposed route uses open dies, closed dies or another identified arrangement. Request the intended sequence through machining and heat treatment.
- Allowance and tooling
- Ask the supplier to identify machining allowances, tooling responsibility and how samples will be reviewed against the finished requirement.
- Treatment responsibility
- Record who performs the specified treatment and who verifies the resulting material condition. Do not replace an alloy-and-temper requirement with an informal hardness description.
- Traceability
- Request agreed links between material batch, processing records and supplied inspection documents. Confirm what the documents actually report.
Questions for the supplier
- Question 1Does the quote cover a forging blank, a heat-treated blank or a fully machined component?
- Question 2Which plant performs each operation in the proposed route?
- Question 3How will a change to the alloy, temper or drawing be raised for approval?
Avoid these comparison gaps
- A near-final shape is not proof of the final material condition.
- A result from one test does not automatically establish every specified property.
- Avoid accepting an unspecified substitution because a part looks similar.
Your next step
Prepare a sourcing brief
Download a structured draft locally; no information is sent.
Read the checklist →Compare supplier responses
Check differences in delivered scope before comparing price.
Read the checklist →Explore the relevant product form
Connect the process to material and dimensional fields.
Read the checklist →
Technical background & source boundaries
- The Aluminum Association — Processing 101Official background reference. This checklist is AlumHome editorial guidance, not a supplier endorsement or a replacement for the applicable specification.
- The Aluminum Association — StandardsOfficial background reference. This checklist is AlumHome editorial guidance, not a supplier endorsement or a replacement for the applicable specification.